1. Dear Drugs-Forum readers: We are a small non-profit that runs one of the most read drug information & addiction help websites in the world. We serve over 4 million readers per month, and have costs like all popular websites: servers, hosting, licenses and software. To protect our independence we do not run ads. We take no government funds. We run on donations which average $25. If everyone reading this would donate $5 then this fund raiser would be done in an hour. If Drugs-Forum is useful to you, take one minute to keep it online another year by donating whatever you can today. Donations are currently not sufficient to pay our bills and keep the site up. Your help is most welcome. Thank you.
    PLEASE HELP
    Dismiss Notice

Paraphernalia - Questions about cleaning meth pipe

Discussion in 'Methamphetamine' started by Snow_hippie, Nov 9, 2010.

  1. Snow_hippie

    Snow_hippie Newbie

    Reputation Points:
    5
    Joined:
    Sep 12, 2010
    Messages:
    20
    Female from U.S.A.
    SWIM is trying to find different ways in cleaning a pipe and has needs help with 2 methods that have been suggested.

    First...
    SWIM was told to use a magic eraser to clean the bottom of the bowl after smoking.
    How does SWIM actually use it to clean the pipe?
    SWIM doesn't want to clean the whole thing. Just the little bit of black that is left after a bowl is smoked.

    Next...
    SWIM heard about a method where one puts the pipe in the freezer and then blows through the neck for all the resin to move down to the bowl.
    Does this actually work and if so how long does it need to be in the freezer?

    Thank youu :)
     
  2. Jayhal

    Jayhal Silver Member

    Reputation Points:
    74
    Joined:
    Oct 30, 2010
    Messages:
    86
    Male from taiwan
    The best way to clean a spot on the bottom of a bowl is using a q-tip. With a dab of water on the q-tip,insert q-tip and kneed it against the bottom of the bowl(imagine trying to start a fire with a stick) while the bowl is on a flat surface. You can also flip the bowl upside-down to do this, giving you a better view of the residue removal. If the stain is especially hard to clean you may want to try create more pressure from the q-tip by using your leg or another surface as an anchor for the other end of the q-tip; simultaneously apply pressure and knead the q-tip. You can also heat the bowl from the bottom a bit(remove q-tip obviously) and then continue doing this if the stain still proves persistent.

    I have a picture in one of my albums on here depicting the typical tools The Flaming Rainbow he cleans his bowls with, it's in the Meth Tools album.

    Jayhal added 2 Minutes and 17 Seconds later...

    One thing I forgot to stress is to be careful, especially when upside-down, to not apply so much pressure as to risk breaking the glass.

    I know that's slightly retarded to bring up, but I just thought I'd throw it up here anyways.

    Jayhal added 236 Minutes and 53 Seconds later...

    Another addition: I'm very curious about the freezer thing. I'm not sure how that would work... First, would blowing into the pipe create sufficient temperatures for the koNaenae to liquify and move down the pipe? Second, why the freezing? Does it somehow allow the slightly heated drip to cool down between movements and collect together so as to better slide down the pipe or..?

    Where did you hear about that particular method?
     
    Last edited: Nov 9, 2010
  3. Snow_hippie

    Snow_hippie Newbie

    Reputation Points:
    5
    Joined:
    Sep 12, 2010
    Messages:
    20
    Female from U.S.A.
    SWIM knows how to clean her pipe with a Q-tip and what not. Just wondering mainly about the magic eraser. Thanks though.. :)

    But AFOAF explained the freezing method. A pretty reliable source too, so it probably does work. Just need to know the amount of time and if theres any other steps SWIM doesn't know about.
     
  4. RealGanjaMan

    RealGanjaMan Gold Member

    Reputation Points:
    499
    Joined:
    Oct 19, 2005
    Messages:
    453
    Male from U.S.A.
    Sorry, can't shed any light on the original method inquired about (magic eraser) but here is what Monkey has always done:

    Monkey uses oil burners (meth pipes) mainly for smoking hash oil, which leaves them quite, quite dirty after a few grams. At first when it would get too thick to use monkey would just throw them out and go buy another one for less than the days lunch money. Eventually he came across a really cool, thicker, hand blown & color swirled oil burner, and when this one clogged up he wanted to clean it to perfection somehow... behold, the propane torch! (seriously) (and not the little ones, a full size brazing torch). It works great, he uses it on every oil burner now, just turns the torch to about half-strength and lets pipe get red hot one section at a time, anything on the surface will promptly be blasted/melted into oblivion. Literally, this makes meth pipes legal again. 100% clear.

    Whether SWIY has a propane torch laying around is another question ;)
     
  5. Jayhal

    Jayhal Silver Member

    Reputation Points:
    74
    Joined:
    Oct 30, 2010
    Messages:
    86
    Male from taiwan
    I'm curious what source you heard about the freezer method from, The Flaming Rainbow tells me he's very interested. I'll give him the link if you PM it to me. He's got several ball pipes with a decent amount of residue in each, and he said he'll try it out.

    He's thinking of starting with 5 minutes in the freezer?

    Jayhal added 30 Minutes and 57 Seconds later...

    I did a quick search.... Are you sure you don't mean heating the pipe, blowing the melted residue down the pipe, THEN putting it in the freezer for a bit to solidify for removal?
     
    Last edited: Nov 10, 2010
  6. Snow_hippie

    Snow_hippie Newbie

    Reputation Points:
    5
    Joined:
    Sep 12, 2010
    Messages:
    20
    Female from U.S.A.
    SWIM was told about the freezing method from a friend who isn't able to be contacted. That's why the question was brought here. haha

    But SWIM thinks she remembers the time being around 7 or 8 minutes.

    -Put it in the freezer
    -Leave in for 7 or so minutes
    -Take out and blow through stem

    This is suppose to work. SWIY should try it out and tell about all the results !

    SWIM would but she doesn't have a res pipe at the moment
     
  7. sgtfreeksho

    sgtfreeksho Newbie

    Reputation Points:
    0
    Joined:
    Jan 27, 2009
    Messages:
    3
    Male from U.S.A.
    I had a pet gold fish that used several different methods to clean.

    Baking soda – Baking soda, little bit of water from his fish bowl and some q-tips, once satisfied with his clean up, rinse the pipe out to be sure all the baking soda is gone.

    Toothpaste- Same as above, however, my pet gold fish did say to spend extra time rinsing as colgate tastes like shit.

    However, the most favorite and worked the best for my pet gold fish was winks, again he said he can’t stress enough to take extra time rinsing as winks is harsher than any cut he has ever tasted!


    I also asked my pet gold fish about the magic eraser theory and he stated he has seen his best friend’s cat cut a small piece off the magic eraser and insert it in the bowl, utilizing a q-tip and water , cleaned the pipe.
     
    Last edited by a moderator: Apr 30, 2017
  8. kailey_elise

    kailey_elise Gold Member

    Reputation Points:
    6,126
    Joined:
    Nov 3, 2004
    Messages:
    4,111
    Female from Massachusetts, U.S.A.
    The "Mr. Clean Magic Eraser" (and to some degree, generic versions thereof) do a superb job of removing even the worst scuff marks & such.

    I assume we're talking about the outside of an oil burner, that might still have marks on it, even after it's been washed clean of any potential "carbon residues"?

    I don't know HOW the Magic Eraser does its magic, but using it just like any other sponge, or placing the Eraser on the table and rubbing the oil burner against it should do the job of cleaning VERY nicely. And even though it just looks like a white sponge, it's WAAAAY more than that! It's highly recommended for cleaning anything & everything. :)

    Hope this helps!

    ~Kailey
     
  9. ex-junkie

    ex-junkie Newbie

    Reputation Points:
    4,426
    Joined:
    Feb 23, 2009
    Messages:
    3,160
    Female from Australia
    ^Yup, we call em magic sponge here. Nothing cleans like those things aye. You can buy them already cut into small squares, or just cut them yourself. They really are magic. :laugh:
     
  10. iNFRiNGE

    iNFRiNGE Silver Member

    Reputation Points:
    131
    Joined:
    Apr 18, 2011
    Messages:
    57
    Male from earth
    This is an old thread but I'll post my link to the real way to clean you hardware.



    You are absolutely correct about the product, how this is not the set in stone method is beyond me and why more people don't know about this today is another shocker since that it has been a vital part of our recreational tools for over 12 years now.

    Here's some information and a few tips for the purpose of educating those that know nothing of what it is and to avoid embarrassment or that "look at this tweaker" look you may get if you have no idea what you are looking for other than a name and they ask you what's it for. Ahh duhhh "Fer my oil burner what else" A lot of places are hip to what it's used for as I'll explain below.


    1. The manufacturers and brand name is "Whink" no "s" but I'm sure you would find this out eventually.
    2. The products actual name as written on the label is "Rust Stain Remover"
    3. The container is a brown plastic bottle, with a white cap, check their website for a gander at it before you go on your journey.
    4. Where you may find it, in grocery stores it's located primarily on the laundry detergent aisle or with the cleaning products if you shop at Wally World. In hardware stores it's usually where the cleaning products are located.
    5. What's it used for? "quickly and easily removes rust stains from white sinks & white toilet bowls as well as colorfast fabrics & carpets."
    I say may find it because it is becoming harder to locate in major US cities any way and no longer available at every single grocery store and drug store like it used to be 10 years ago. One of the primary reasons is because it's linked to meth users and ironically started to disappeared around the same time Red Devil Lye fell off the shelves even though it's not used in manufacturing it's part of the element and also often boosted by none other than "the element".

    This may or may not be useful to some of you but those that actually "care" about their tools and hardware usual appreciate this info.


    1. What is the active ingredient? "Hydrofluoric acid"
    2. WTF is that? "a compound of hydrogen and fluorine dissolved in water to produce an extremely corrosive acid traditionally used to etch glass and it is the only acid that will dissolve glass. It is neat and leaves a clear finish"
    3. How do I use it sounds dangerous because it's a highly corrosive acid? "If you have super sensitive skin you may want to wear gloves, personally it has never burned the users I know skin, but always practice safety, but understand although it will dissolve glass remember it's used for stains on clothes and doesn't burn holes in the clothes like muriatic or sulfuric acid does"
    4. OK I'm sold how do I use it? "The above quoted method mentions being faster than the bleach method by using a Qtip and wiping around and rinsing. You can do that if you want if you want to take the long route and shorten the life of your pipe by thinning your bowl out.
    5. OK smarty pants whats the faster and better for my piece way then what is already really fast with the Qtip? "Based on over 12 years experience with the goods do the following if you really care about your hardware and want the best results invest in a gallon of distilled water, if you are a cheap skate use pure tap which you'll need anyway and still works but you'll see why I mention distilled. Get your piece no matter how wrecked it is and if you are a Bic user (shame on you, I'll cover that in lighters 101 someday) and have black shit all over the outside which we'll get also in a second pour enough product down your stem to fill a little less than half your bowl with the acid and hit the bowl with a torch lighter or hold it over the stove for about 5 seconds, swirl the product in the bowl and you should see your entire stains are lifted off instantly, pour the crap out down the stem and run tap water down the neck through the bowl for about 10 seconds, follow that with a pipe full of distilled water shake it around dump it and you are done. If you have a shit ton of stains on the outside pour some on a paper towel and wipe the stains off. Distilled water leaves NO water spots which are minerals in the water and a gallon is about a dollar should last at least a month if you are only final rinsing. To dry use a old t-shirt cut off a piece so it looks like a shoe lace when you roll it up and feed it down the neck of your pipe. The best is a slice of Sham-WOW or the Absorber. The whole process takes less than one minute once you get it down. NOTHING can match this method as far as being safe for the glass and turn around time period.
    In addition after some time goes by and you feel rough or pitted glass on the bottom of your bowl then follow up with this after you have cleansed your piece again add some acid to your bowl and this time use a QTip and gently rub around the bottom of the bowl area on the inside and outside of the bowl. This conditions the bowl and smooths out the pinholes or pits that eventually start to consume your gear after a while. You can actually feels the roughness on the bottom of the pipe bowl, this will get smoothed out doing this method. Some may have to do this more often some less depending on how often you do your hobby.

    I've heard of people going through up to 10 pipes a week because of neglect or clumsy or whatever but the hardware in service today was purchased in November 2010 and is still as good as new and it gets used daily. That's 100% true no BS. But good care leads to that but I'm extreme when it comes to good hardware and gear. But there's no reason anyone shouldn't be able to get more than a month out of a piece.

    One more thing this also works for 420 bongs and glass pieces that are fucnked up with resin. Only you have to soak them a longer but leaves them like brand new and kills any product sold at head shops for over $20.
     
    Last edited by a moderator: Apr 30, 2017
  11. Reid Welch

    Reid Welch Newbie

    Reputation Points:
    -87
    Joined:
    May 4, 2011
    Messages:
    22
    63 y/o Male from U.S.A.
    4/0 steel wool (finest grade) cleans old glass.

    I learned this in caring for antique radio tubes (valves).

    A rub of the wool on the bottle removes soot, dust, grease,

    and does not remove the tube markings.

    I don't smoke meth...but I suppose the steel wool, a remedy from decades ago,

    will serve to remove stains from pipes if not souls.
     
  12. iNFRiNGE

    iNFRiNGE Silver Member

    Reputation Points:
    131
    Joined:
    Apr 18, 2011
    Messages:
    57
    Male from earth

    OK...:eek:
    Now how do you reckon you get that there steel wool on the inside of the pipe to clean it out? More than likely if some kitty or a chimp is cleaning the outside of the vessel they are gonna clean the inside too unless there's still gear left in it. In which case steel wool would be out of the question as debris and particles of the steel wool are likely to fall into the bowl and taint the gear.

    If somebodies pet is not careful and does it anyway, I'm ain't no rocket scientist but I'm pretty sure that inhaling dust from steel wool doesn't reduce the health risks associated with their recreation by very much. :confused:
     
  13. jamesfromvegas

    jamesfromvegas Newbie

    Reputation Points:
    0
    Joined:
    Jan 5, 2010
    Messages:
    11
    Male from U.S.A.
    try submerging the pipe in bleach then 2mins in microwave. rinse with water dry.
     
  14. DazedforDays

    DazedforDays

    Reputation Points:
    315
    Joined:
    Aug 17, 2013
    Messages:
    430
    Male from earth
    I have not yet used the freezer method because I want to get enough on the atem to make it worthwhile but I will add that my sister told me about thus last week. She said place the pipe in the freezer for 10-15minutes, take out blow through the stem and it will will down right into the bowl.
     
  15. furboto

    furboto Newbie

    Reputation Points:
    -5
    Joined:
    Jun 26, 2013
    Messages:
    34
    Male from U.S.A.
    If you are trying to get the residue out of your stem for use, the best method I have found is to send a few drops of water down the stem. Shake the pipe. Then evaporate the water from the bowl by adding heat (be careful not to overheat and break the pipe). If you have a good amount of residue in your pipe you will have a nice little chunk of product once the water is removed.

    As far as cleaning goes--the best method I have found is to add a little bleach to a glass of water. Put the pipe in the water and microwave for 5 minutes or so. It will look brand new when done.
     
  16. newtstew

    newtstew Newbie

    Reputation Points:
    0
    Joined:
    Jul 5, 2013
    Messages:
    1
    Female from U.S.A.
    WINK rust and stain remover is the best. A small puddle in bottom of pipe with lighter bring to boil and Waa Laa that baby's clean .Pour remaining on cotton ball, wipe outside. Rinse with water, use blow dryer to dry. Like BRAND NEW!. This only works with glass you don't use torches on regularly, and haven't attempted to clean other ways. I've had the same piece for 3 years
     
  17. CaliGirl_Speedin

    CaliGirl_Speedin Newbie

    Reputation Points:
    -15
    Joined:
    Oct 6, 2013
    Messages:
    14
    Female from U.S.A.
    Toothpaste...brings the piece back to life. Just put son on a q-tip or tissue and scrub the piece a bit the rinse off with a little bit of water & waahLAA squeaky clean
     
  18. trevortf

    trevortf Newbie

    Reputation Points:
    0
    Joined:
    Jul 2, 2014
    Messages:
    4
    Male from U.S.A.
    OK....I have read so many conflicting methods on this, so let me preface by saying "There is, obviously, more than one way to skin a cat" ...
    Speaking of cats...My cat is all about getting down with some chunky munky from time to time and the only way he ever wants to booster suck the rooster cluck is by rolling it in a good glass bowl-o (aka- Oil Burner). I will post on the types of pipes he likes on the proper thread, but suffice to say, not to thick, not to thin and AVOID big balls and small holes at all cost...Air flow and puddle size are key.
    Now, on to the CLEANING...Toothpaste, baking soda, and, yes, even carbon-ash with some alcohol/water/saliva on a Q-tip will scrub the char and does a decent job for those 'in-between' reloads and accidental burns. But, there comes a time when SWIY needs a 'good-as-new' piece to blow tastily clean creamy rips from.
    I would avoid Acetone and Rust cleaner, because usually one is just scrubbing and not getting the dick spotless through and through. Also, these are highly toxic and flammable and, quite frankly, pointless to keep around for SWIY's purpose. The Torching method is also not ideal. Many times one will end up shattering one's piece or burning oneself. Secondly, you need a big torch and you need to waste fuel.A torch and extra fuel to burn is something that SWIY doesn't even need to keep around for their purpose (depending on SWIY's preferred method of heat).
    Here is the ultimate clean. Spotless, simple, and with household items.
    1. My dear cat uses the alternate scrubbers around the bowl between loads until he feels that it is time for a clean. At this point, he does all that he feels is worth the effort to put his savings to use...i.e. clean the stem. Everyone has their own way to make use of these leftovers, so I will leave that for the other threads, as well. Kitty just slowly melts, smokes, puddles, cools, smokes, melts and repeats until it is as used up to the point that he feels he can part with it.
    2. Coffee cup, about 20-25ml or 3/4 fl. oz. bleach in the bottom (can sub powdered bleach cleaner, like comet or ajax, in the amount of about a spoonful), fill the rest of the 8oz. Coffee cup with HOT water from the tap up to about 15cm(1/2") from the top. Only a slight swirl is needed to mix the solution.
    3. Put the piece in, bulb-side down, and leave the stem sticking out as little as possible. (This works best with the short stemmers, but the long stems get cleaned too, it just takes an extra minute or so.)
    4. Place it on some old 'fine to bleach' rags or a semi-thick layer of paper towels in the microwave and heat for 2-2.5 minutes (Add that minute for the long-stems). Basically, heat it to boiling and let it boil for about 30-45 seconds so that the solution is bubbling out of the stem for about half a minute or so.
    5. Things are now quite hot, so BE CAREFUL! If you have the time and patience, let it sit and cool. The soak will do it good. If not, run the water until it is WARM. Put the cup and piece in the sink and let the water flow, cooling things gradually (Exposing directly to cold water will shatter that dick like a T-1000).
    6. It shouldn't take long before SWIY can handle the oil burner. At this point, FLUSH WITH THE CLEAN WATER THOROUGHLY! Flush with hot, cold, hot, just be sure it flushes it out entirely. Shake the excess water out.
    7. Now, there may be some spots left. No worries, they will clean off easily with the Q-tips SWIY is going to use anyway to dry out the excess water, just add moderate pressure and scrub those trouble spots if they exist. This is when kitty takes the rags from the microwave, which will have some bleach water on them, to wipe down the outside of the piece and clean any trouble spots that may exist on the outside. Afterwards, he is sure to wipe down his microwave...it can probably use a little cleaning. He is sure to dry up any excess bleach water in the microwave afterwards.
    8. *THIS IS THE OBVIOUS STEP I SEE SO MANY POSTERS LEAVE OFF*, and it should be used with any method that involves a liquid. In order to finish completely drying the pipe, and removing any trace amounts of bleach...Kitty uses a lighter, or torch, to heat the pipe, ALL OVER, to the point that the inside contents are completely evaporated and dry. (It doesn't take much....just about a minute of careful heating). Be sure to use a towel to hold the hot parts as SWIY heats up and down the stem and back around the entirety of the bowl, even upside down and inside the carb to ensure all the liquid evaporates.
    -VOILA! Little Kitty now has a pipe that is crystal clear and ready to fill with crystal cheer.
    If that didn't do the trick, then his pipe was WAY too dirty, and it simply required to soak in the solution after heating for ~5-10 extra minutes. But, he mainly just needs to learn how to 'slow his roll' and not burn that shit up and stain the pipe so hardcore. Kitty hopes this helps some to make those really good-burning pieces to last longer and smoke cleaner.
    ***ANECDOTAL: THIS WAS MY 1st POST. I hope it helps clear up some unsound and over-the-top cleaning methods. That piece is an important part of the ritual and proper use of the substance. SWIM had an ULTIMATE pipe that was producing such great results for so long. Last week, he had a fat bowl of premium octane loaded and was carrying it with him to let his dogs outside. His younger dog is an excited dog that likes to jump and decided to jump-punch the "Chock-full-o-cuts" quality pipe right out of SWIM's hand where it shattered on the tile....that waste of product and pipery really upset SWIM....needless to say, he can't stand to waste, so there was plenty of tweezers-use and scraping after that happened lol...But, the shitty pipe SWIM got as a replacement reminded him just how big of a difference a good dick makes :D ***

    -I hope you enjoyed the advice, slang, and word-play I used in the post...Apologies if it was a bit long and thorough, but SWIM has been rolling the bolo a little this morning, so...deal with it! lol Happy Alterations!
     
  19. Asterik216

    Asterik216 Newbie

    Reputation Points:
    0
    Joined:
    May 12, 2014
    Messages:
    17
    Male from U.S.A.
    Cut a strip of magic eraser and roll it up into a straw. Find something to put into the straw to make it more rigid so it doesn't bend. As the magic eraser gets dirty push it out of the straw and cut that piece off to expose a new section of clean eraser. This is by far the best method and you never have to touch a dirty eraser in any way as I just cut it off right into the garbage.
     
  20. Heretic.Ape.

    Heretic.Ape. Platinum Member & Advisor

    Reputation Points:
    3,394
    Joined:
    Apr 17, 2007
    Messages:
    2,640
    Male from U.S.A.
    Magic eraser or always using a wet cloth when smoking between hits helps with the outside. That helps avoid burning the shit inside.
    After use, a wet q-tip rub-down of the charred bits that happen when the shit gets burned
    If q-tip isn't enough, a little bit of water inside the bowl and a blowtorch to boil away the little bastard, but be careful as this can warp or break the pipe, which is no good in general but especially when full of boiling hot water.
    Regularity with keeping the bottom wiped off while smoking and using a wet q-tip between bowls tends to work well unless you burn the hell out of it and it's cut with some common adultrants that don't burn at the same temp.
    I've never used the freezer method but find simplygently scraping the stem down into the bowl, sometimes with a little help from a lighter to help tricky bits drain down to the bowl (I recommend keeping the stem opening covered with a thumb or such so it doesn't just vape away half of the goodies.
    But simplicity and keeping things clean as you go tends to work well for me.
    And don't hold the lighter so close to the bowl, blow before hitting to get the shit loose and spin the pipe at a good pace so there is no cause for ugly black chunky style shit to further warp and fuck up your pipe.
    Or just go pick up a new pyrex.